Sauna instructions
Harvia PRO D2i
For LODGE 2,
LODGE 3,
LODGE 4,
LODGE 5,
LODGE 6,
LODGE 7,
LODGE 8,
and LODGE 10
1. Turn on the sauna
Press the power button on the control panel.
Use the Mode button to switch between the different functions.
Then use the + / – buttons to set the desired temperature.
(Recommendation: 80–90 °C).The desired heating duration can also be set if required.
Depending on the starting temperature, the sauna takes approximately 30–45 minutes to heat up.
2. During the sauna session
Please always use a towel as a base while using the sauna.
For a pleasant sauna experience, we recommend:
Sauna for 8–15 minutes
Then cool down in the fresh air or under a cool shower.
Drink plenty of fluids afterwards
3. Sauna infusion
Our sauna has an integrated sauna infusion shaft.
This is how the infusion works:
Open the small wooden flap under the bench seat (see illustration).
Using the sauna ladle, slowly pour a small amount of water into the
Pour into the opening.The water flows directly onto the hot sauna stones and ensures
for a pleasant infusion.
Important:
Please use only clean water or sauna infusion concentrates (highly diluted).
Never pour undiluted essential oils directly into the container.
One ladle of water (approx. 100–200 ml) is sufficient for each infusion. Too much water can damage the oven or make the steam uncomfortably hot.
4. Turn off the sauna
After the sauna session, simply switch off the sauna using the on/off button on the control panel.
Notes
✓ Never use the sauna to dry clothes or towels.
✓ Children may only use the sauna under adult supervision.
✓ Should you have any questions or require support, we are always happy to help.
We wish you relaxing and restorative wellness moments in the
ALPINE LODGE FUCHSBAU
The infrared panel is controlled directly in the sauna.
Our infrared panels provide pleasant deep heat and are ideal for relaxation as well as for the regeneration of muscles and joints.
x Turn on infrared panel
Press the power button (A).
The infrared panel starts immediately and begins heating up.
Adjust intensity
The heat intensity can be adjusted at any time:
+ Button (B) = Increase intensity – Button (C) = Decrease intensity. The LED display on the left shows the currently selected heat setting. Recommendation: Level 3–4 → pleasant, gentle warmth; Level 5–7 → intense deep heat
Infrared Instructions
Harvia PRO D
For LODGE 1
and LODGE 9
Infrared panel
Our infrared panels provide pleasant deep heat and are ideal for relaxation as well as for the regeneration of muscles and joints.
1. Turn on the infrared panel
Press the power button (A).
The infrared panel starts immediately and begins heating up.
2. Adjust intensity
The heat intensity can be adjusted at any time:
+ Button (B) = Increase intensity
– Button (C) = Decrease intensity
The LED display on the left shows the currently set heating level.
Recommendation:
Level 3–4 → pleasant, gentle warmth
Stage 5–7 → intensive deep heat
3. Duration of application
We recommend using:
20–40 minutes
Drink plenty of fluids during application.
4. Switch off
After use, simply switch off the infrared panel using the on/off button (A).
Notes
✓ The infrared panel develops a pleasant deep heat and does not reach temperatures as high as a Finnish sauna.
✓ During use, we recommend using a towel as a seat or back support.
✓ People with cardiovascular disease, fever or acute inflammation should consult their doctor before use.
✓ Children may only use the infrared panel under adult supervision.
Wellness tip
For optimal results, we recommend a treatment time of 20–40 minutes at a comfortable temperature. The gentle infrared radiation penetrates deep into the muscles and can relieve tension and promote regeneration.
Afterwards, take some time to relax, drink plenty of water and enjoy the peace and quiet of your apartment – this will allow the beneficial effect of the infrared heat to be particularly noticeable.
Our tip: Especially after a hike, a bike tour or a day of skiing, infrared heat is ideal for relaxing tired muscles and recharging your energy.
